Du bestemmer over dine data

Vi og vores samarbejdspartnere bruger teknologier, herunder cookies, til at indsamle oplysninger om dig til forskellige formål, herunder:

Ved at trykke på 'Accepter alle' giver du samtykke til alle disse formål. Du kan også vælge at tilkendegive, hvilke formål du vil give samtykke til ved at benytte checkboksene ud for formålet, og derefter trykke på 'Gem indstillinger'.
Du kan til enhver tid trække dit samtykke tilbage ved at trykke på det lille ikon nederst i venstre hjørne af hjemmesiden.

Du kan læse mere om vores brug af cookies og andre teknologier, samt om vores indsamling og behandling af personoplysninger ved at trykke på linket.

 
TjekGratis fragt i DK over 800 kr., undtaget volume pakker
TjekHurtig levering 1-2 hverdage på lagervarer
TjekLang returret 14 dage
Sidst seteSete FavoritterGemt
Indkøbskurv
Fragtomkostninger DKK
Total0,00 DKK
Brug for hjælp?

Kontakt Martin, og få rådgivning

martin@baldurs-archery.dk +45 27513356
MenuMenu
Luk
Produkter
Favorit
EASTON SHAFT RX-7

EASTON SHAFT RX-7

Varenr. 117056
Butikspris   96,00 DKK
Stk. pris v/køb af 1 Stk83,00DKK
Stk. pris v/køb af 12 Stk83,00DKK
Pile Spine
-+
Forventet leveringstid:  Efter aftale eller 5-10 arbejdes dage
Gratis fragt over 800,-
Trustpilot Trustpilot
Henter dokumenter...
Vi gør vores bedste for at besvare alle henvendelser indenfor 24 timer.
Send spørgsmål
Mere info

NEW Easton RX7- The Ultimate Indoor Recurve Arrow Shaft

Easton’s exclusive tapered technology allows a bigger line-catcher arrow at lower bow and/or point weight

New for the 2020 indoor season, Easton announces the most accurate, technically advanced indoor arrow shaft ever devised for recurve finger shooters- the all-new RX-7 series.

Available in three spine values- 525, 475, and 420- in a 21, 22, and World Archery Maximum 23 diameter.

Easton’s new RX-7 series 7178 aluminum arrow shafts incorporate a precision rear taper – effectively letting recurve shooters shoot a bigger arrow at a lower bow weight, and also with less point weight, while maintaining maximum shaft diameter for higher scoring potential.

Proven in the 2018-19 competition season by some of the top archers in the world, including Team USA’s Brady Ellison and Jack Williams, the RX-7 is based on the same proven design principle as Easton’s X10 and A/C/E shafts, with the precision flexible, forgiving rear taper.

Williams said: “The rear tapered design of the RX-7 creates the most forgiving aluminum arrow for a recurve archer. It allows archers to use a lighter point weight to achieve the proper tune, creating a faster release and better arrow flight.”

This design element drops the dynamic spine of the arrow shaft by up to one full size, which allows the use of a larger diameter and lighter point.

Until now, many shooters seeking maximum diameter arrow shafts often needed to compromise the bow tune, and potentially compromise shooting technique forgiveness, by using super-heavy points, leading to greater error potential with slight natural release inconsistencies.

By using a normal weight point, and a precision engineered, more flexible rear taper with a weight-forward design, RX-7 series shafts provide the ultimate in finger release forgiveness.  RX-7 uses full-strength 7178-T9 alloy that easily copes with tough European target materials.

For example, the RX-7-23 has a spine of 0.420, compared to a spine of 0.342 for the equivalent Easton X23 2315 shaft.  As an example, this allows the RX-7-23 420 to be tuned with an Easton 2315 100 or 125 grain bullet point, at a normal shaft length.  Compare this to the X23 2315, which is often tuned by recurve shooters with a heavy, 200 or 300 grain aftermarket point, at a longer than normal shaft length.  The 21 and 22 sizes accept both Easton one piece bullet points or NIBB points for the 2114 or 2214 sizes, respectively.

RX-7 shafts are supplied with Easton Super-UNI bushings, which accept available Easton Super Nocks, 3D-Super Nocks, and the popular size 19 Beiter nock.

The updated tuning chart for the RX-7 is available online at www.eastonarchery.com

RX-7 shafts are available from your authorized Easton dealer now, and are 100% Made in the USA.

A technical article detailing tuning techniques for the RX7 can be read at the link below.

SPECIFICATIONS

https://eastonarchery.com/2019/10/technical-guide-to-setting-up-the-easton-rx-7-arrow-shaft/

SIZE SHAFT WEIGHT (GPI) SPINE @ 28″ SHAFT O.D. (INCHES) STOCK LENGTH (INCHES) BULLET POINT NIBB POINT
23 – 420 10.4 0.420 .365 33.75 2315 – 100 grain N/A
22 – 475 9.7 0.475 .348 33.5 2214 – 103 grain 2214 – 100 grain
21 – 525 9.3 0.525 .328 32.5 2114 – 78 grain 2114 – 100 grain
Showing 1 to 3 of 3 entries
PreviousNext

  POINT OD NOCK OD ID SPINE LENGTH TOTAL WEIGHT @LENGTH -GPI
Model in in in   in grains grains / inch
RX7 23-420 0.3649 (2315) 0.3590 0.3350 420 33.75 351 10.4
RX7 22-475 0.3482 (2214) 0.3450 0.3205 475 33.5 327 9.7
RX7 21-525 0.3282 (2114) 0.3240 0.3000 525 32.5 303 9.3

Andre kunder købte også

×
Senest sete
Gemt
×
Vis alle