Du bestemmer over dine data

Vi og vores samarbejdspartnere bruger teknologier, herunder cookies, til at indsamle oplysninger om dig til forskellige formål, herunder:

Ved at trykke på 'Accepter alle' giver du samtykke til alle disse formål. Du kan også vælge at tilkendegive, hvilke formål du vil give samtykke til ved at benytte checkboksene ud for formålet, og derefter trykke på 'Gem indstillinger'.
Du kan til enhver tid trække dit samtykke tilbage ved at trykke på det lille ikon nederst i venstre hjørne af hjemmesiden.

Du kan læse mere om vores brug af cookies og andre teknologier, samt om vores indsamling og behandling af personoplysninger ved at trykke på linket.

 
TjekGratis fragt i DK over 800 kr., undtaget volume pakker
TjekHurtig levering 1-2 hverdage på lagervarer
TjekLang returret 14 dage
Sidst seteSete FavoritterGemt
Indkøbskurv
Fragtomkostninger DKK
Total0,00 DKK
Brug for hjælp?

Kontakt Martin, og få rådgivning

martin@baldurs-archery.dk +45 27513356
MenuMenu
Luk
Produkter
Favorit
BEITER V-BOX STEEL VIBRATION DAMPER BASIC 5.10oz - 145gram
BEITER V-BOX STEEL VIBRATION DAMPER BASIC 5.10oz - 145gram

BEITER V-BOX STEEL VIBRATION DAMPER BASIC 5.10oz - 145gram

Varenr. VBOXSTEEL
Butikspris   759,00 DKK
Stk. pris v/køb af 1 Stk661,50DKK
-+
Forventet leveringstid:  2-4 dage
Gratis fragt over 800,-
Trustpilot Trustpilot
Henter dokumenter...
Vi gør vores bedste for at besvare alle henvendelser indenfor 24 timer.
Send spørgsmål
Mere info

V-Box vibration dæmper fra Beiter bliver leveret med 4 gummi membramer. 
Flg. membramer anbefales max vægt

• #1 : 6 oz (180g).
• #3 : 10 oz (300g).
• #5 : 16 oz (450g).
• #7 : 25 oz (710g).

 

The Beiter V-BOX is the base of a multifunctional dampening system for stabilizer systems. The stiffness of the V-BOX can be modified with the interchangeable membranes which have different properties. The system is completed by weights and compensation spacers which can be mounted with different screws, threaded studs and adaptors.


Beiter Centralizers can be ordered with 5/16"-24 inner or outer weight adapters at no extra charge. But the V-box is compatible with almost all available stabilizer systems. On systems using a 5/16 thread, the Beiter V-BOX can be mounted on the standard thread that comes with the stabilizers, while for stabilizers using 1/14 threads, inner and outer thread adaptors to a 5/16"size are available.

How does the Beiter V-BOX system work?
The various stabilizers on the market have different rigidities. Archers may find rods too stiff, and sometimes also too weak. With a multifunctional and customizable dampening system, such as the Beiter V-BOX, each stabilizer can be adapted to the respective shooters needs. This customization is achieved with the membranes and their different degrees of stiffness, and also through the use of the available weights and spacers. This combination can affect not only the weight distribution, but by their inertia, in combination with the Beiter V-BOX, the entire damping behaviour.


Where should, or can, the weight be attached?
Weights can be attached in front of and behind the Beiter V-BOX. An optimal set up will involve placing weights both sides of the V-BOX. #5 and #7 membranes can support max. 10 oz in front of the V-Box. Attention: the #1 membrane supports max. 5 oz. The weight of the BeiterV-BOX unit is 1.75 oz - 49grams). As an example at a total weight of 16 ounces, the weight could be distributed like this: 2 x 3 oz weights and 1 x 1 oz weight in front of the V-Box and 3x 3 oz weights behind. If you want to shoot a less stabilizer weight, the distribution of the weights can be adjusted by using the spacers. Due to the lever effect, shifting the weights forward on the screw changes weight distribution and dampening, achieving the desired balance with less weight than usual! Thanks to the combination of weights, washers and membranes in 4 different stiffnesses, innumerable different settings and options are possible.


IMPORTANT: Do not choose a too soft a membrane. If you see that the weight is bending the Beiter V-BOX, then use a harder membrane or less weight!
It is important to use the maximum weight setup only with the two hardest membranes (#5 and #7). The Compensation Spacer is not only useful for shifting weight: thanks to the Spacers low weight, you can use it as placeholder on the threads. The various colours available can be combined to individually customize your Beiter V-BOX System and stabilisation! It is important to use the base plate, which is not only an optical transition between the V-BOX and the stabilizer system, but provides an extremely stable connection between components. The V-BOX has a diameter of 32mm. Base Plates are available in 30 to 26mm, 30 to 23mm and 30 to 20mm sizes.

Andre kunder købte også

×
Senest sete
Gemt
×
Vis alle